Multifunctional hall lighting solutions

Introduction to multifunctional hall lighting project

1. The multi-functional hall is a place that can be used for a variety of activities. It can accommodate audiences of different sizes and be used for various types of performances and activities. Its functions include but are not limited to:
1. Hold performances: Multi-functional halls usually have good audio, stage, lighting and other facilities, and are suitable for holding various types of performances, such as concerts, dramas, song and dance performances, etc.

2. Hold meetings: The multi-functional hall can arrange tables and chairs, change the stage setting, etc., and is suitable for holding meetings, seminars, symposiums, etc. of various sizes.

3. Hold exhibitions: The multi-functional hall can be used to hold exhibition racks, lighting, etc., and is suitable for holding various types of exhibitions, trade fairs, etc.

4. Hold weddings and banquets: Multi-purpose halls are usually equipped with catering services and venue decoration services, and are suitable for holding weddings, celebrations and various types of banquets.

In short, the multi-purpose hall has a very wide range of functions and can meet the needs of various types of activities. It is a very important cultural and social space.
A multi-purpose hall is a multi-purpose place that requires lighting solutions to be designed according to different activity types and needs. The following is a lighting solution for a municipal government multi-purpose hall:

Overview of multifunctional hall lighting project: In order to meet the needs of various activities, lighting design needs to consider factors such as stage size, floor height, auditorium layout, stage background color, etc. The appropriate type and number of lamps, control systems and accessories need to be selected. In multi-purpose halls, fixed lighting equipment and temporary mobile lighting equipment should be installed so that they can be freely combined according to the needs of different types of performances or activities.

Multifunctional hall lighting design analysis

2. In multi-functional halls, the design of stage lighting needs to consider the following factors:

– Stage size: The stage of the multi-purpose hall is 15 meters wide, 5.4 meters deep, and 6 meters high. Especially if the floor height is high, the lighting needs to be able to cover the entire stage area. At the same time, consideration needs to be given to avoiding light funneling.

– Event types: The multi-purpose hall can be used for different types of performances and events, such as concerts, plays, movie screenings, weddings, banquets, conferences, etc. Different activities require different lighting effects, so multiple lighting solutions need to be designed.

– Color requirements: Lighting design needs to consider the stage background color and performance characteristics. In concerts, soft transitional colors need to be used; in dramas, lights need to be used to express different situations and atmospheres.

– Auditorium layout: The layout of the auditorium will affect the lighting effect, and factors such as the size and height of the auditorium need to be taken into consideration.

Multifunctional hall lighting design configuration plan

According to the size and height of the multi-functional hall, as well as the needs of different types of activities, it is recommended to adopt the following lighting configuration scheme:

– Performance stage lighting plan:

1. Main stage lighting design:

– Several three-color surface lights for lighting actors and performance areas;
– Several film and television soft lights, used to illuminate actors and fill in the performance area;

– Several 54-piece full-color par lights are used to illuminate the overall background of the stage;

– Several 295W beam lights for lighting special effects;
– Several 350w three-in-one beam lights for lighting special effects;
– 2 sets of follow-up lights, used to focus the actors’ performance;

– A DMX control system for lighting control and adjustment.

2. Front desk lighting design:

– Several three-color surface lights are used to illuminate the front desk and host area;

– Several 54-piece full-color par lights to create an atmosphere;

– A DMX control system for lighting control and adjustment.

3. Stage edge lighting design:

– Several film and television soft lights for illuminating the edge of the stage and background;

– Several 295W beam lights for lighting special effects;

– A DMX control system for lighting control and adjustment.

In short, the lighting solutions for multi-functional halls need to be designed and planned according to actual needs to meet the needs of different types of activities and ensure the best performance results. Factors such as equipment durability and maintenance costs also need to be taken into consideration.

3. Implementation instructions
Advanced and reasonable lighting system configuration, equipped with lamps and equipment with the highest level of modern technology, are the prerequisites to ensure that the overall design goals of the stage lighting system can be achieved. The reasonable configuration of lamps and lamp positions is an important symbol that fully reflects the level of lighting design. The stage lighting positions are arranged in an all-round three-dimensional distribution. Surface light, side light, top light, backlight, chasing light and other areas form an all-round lighting array. There are light distribution points in each part of the stage to eliminate dead zones and can be flexible and changeable. Mix as needed.
1. Surface light design configuration
Surface light is the main light on the front of the stage. It is mainly used to illuminate the front area of the stage. It plays a role in front lighting for the leaders or performers on the stage. It is used for character modeling or to make objects on the stage present a three-dimensional effect. In the design plan, the lighting should be arranged according to the light projection distance to ensure that the surface light projection effect is achieved, the light spot is uniform, and the illumination is consistent.
2. Top light and backlight design configuration
The top light is set above the stage, and the lamps are hung under the light pole. Its function is to provide necessary lighting for the deep performance space of the stage. The top light includes forward light and backlight, which can be overlapped on the same light pole. The lamps can be arranged according to the The show requires configuration. The first top light is connected with the surface light to illuminate the main stage area. When connecting, pay attention to the height of the characters; the second to the last light can be projected directly behind the stage according to functional needs, can also be projected vertically downward, or can be used as backlight Project forward; thereby enhancing the lighting of the stage characters and scenery space. The front and rear lights are connected to achieve relatively uniform color and brightness in the stage performance area.
3. Side light design configuration
The function of side light is to create a sense of direction of the light source from the side of the stage, creating a sense of hierarchy and three-dimensionality for the leaders or actors on the stage. It can be used as auxiliary lighting to illuminate the characters’ faces, and can also enhance the level of the scenery and render the characters and stage space environment. Factors such as the angle, direction, distance of the light, type of lamp, power, etc. will all cause various side lighting effects. The shooting distance of the side light is from near to far, and the light projection angle is from near to far. There are many changes. The modeling light from one side or both sides can emphasize and highlight the outline of the side, which is suitable for expressing reliefs, figures and other volumetric objects. Effect. Unilateral light can show a strong contrast between yin and yang. Bilateral light can express splint light with personalized characteristics, but the light ratio of the front auxiliary light and the side light needs to be adjusted to obtain a more complete modeling effect.
4. Sky lighting design and configuration
Sky row lights are diffused projection lamps that project light and color onto the upper part of the stage canopy from top to bottom. Rows of lamps are evenly placed in front of the stage canopy to project the canopy to express the horizon, horizontal lines, Sunset, etc.; usually used in conjunction with floor lamps to make the color changes richer, and the lamps are used in combination with single lamps.
5. Ground lighting configuration instructions
Contrary to the sky row lights, the floor row lights are diffused projection lamps that project light and render colors to the lower part of the stage canopy from bottom to top. They are usually used in conjunction with the sky row lights to make the color changes richer. Use single lamp combination.
6. Follow spotlight design and configuration
Lamps designed based on the principles of optical imaging and zoom have functions such as changing the size, color, light and shade, virtual reality, etc. of the aperture. During the performance, they are installed on a special bracket to follow the movement of the actors and at the same time enhance the lighting brightness to increase the audience’s attention. It can be installed in various locations in the performance theater space to achieve partial lighting effects on the actor’s half body, whole body, long distance and small range. Sometimes, light chasing can also be used to express abstract and illusory stage plots.